440 COOLING EQUIPMENT
443 Heat exchanger
The control system can be delivered with a fiwed heat exchanger on top of the control
cabinet. The heat exchanger extends the temperature range to 45°C.
The heat exchanger is required to keep the nominla temperature range to 40°C when the
control cabinet is placed so that the cooling effect is not satisfied, i.e. when the free space
around the central cabinet is less than 100 mm.
The heat exchanger is working when the cabinet door is closed.
444 Air conditioner
The control cabinet can be fitted with a fixed air conditioning unit. The air conditioning
unit is required to keep a temperature below 45° C inside the control cabinet if the
ambient temperature is below 45° C.
The air conditioner is working when the cabinet door is closed.
480 Program versions
In addition to basic functions , there are a number of program functions included in one
of the program versiona: ( see chapter 4)
481 Material Handling/ Gluing -MH/GL/SW
482 Arc weld - AW
Description 1KB 2000
55
To Next Page
Loading...
