ABB IRB 460 Series - Page 355

Action
This step is valid for RobotWare 6.02 and later.3
Calibration method used at factory for each axis is shown, as well as calibration
method used during last field calibration.
Tap Manual Method (Advanced).
xx1500000944
A screen is displayed, tap Rev. Counters.
en0400000771
4
Continues on next page
Product manual - IRB 460 355
3HAC039842-001 Revision: P
© Copyright 2012-2018 ABB. All rights reserved.
5 Calibration
5.3 Updating revolution counters
Continued