3 Maintenance
3.7.5. Reading the SIS output logs
1973HAC020993-001 Revision: G
© Copyright 2004-2008 ABB. All rights reserved.
Gearbox time Service Message
X% of the service
interval has expired
for gearbox x!
X percent of gearbox hours remain until the auto-
matically calculated gearbox time limit expires.
How to set the value determining when the
message is to be shown, is detailed in section
Setting the SIS parametersSetting the SIS
parameters on page 194.
Available in:
SIS message in
the log:
Meaning:
Continued
To Next Page
Loading...
