3 Maintenance
3.3.12. Inspection, damper axes 2-5
3HAC020993-001 Revision: G146
© Copyright 2004-2008 ABB. All rights reserved.
3.3.12. Inspection, damper axes 2-5
Location of dampers
The figure below shows the location of all the dampers to be inspected.
xx0400001024
Required equipment
A damper must be replaced if damaged!
A Damper, axis 2 (2 pcs)
B Damper, axis 3 (2 pcs)
C Damper, axis 4 (1 pc)
D Damper, axis 5 (2 pcs)
Equipment Spare part/ art. no. Note
Damper axis 2 3HAC 12991-1
Damper axis 3 3HAC 12320-1
Damper axis 4 3HAC 13564-1
Standard toolkit - The contents are defined in section
Standard toolkit on page 388.
Continues on next page
To Next Page
Loading...
