Inspecting the evacuation hole
NoteAction
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot working
area.
1
WARNING
Handling gearbox oil involves several safety risks.
Before proceeding, please read the safety inform-
ation in the section Safety risks during work with
gearbox lubricants (oil or grease) on page 36.
2
xx1500001057
Do a leakage check of the sight glass/evacuation
hole of each motor.
If any oil is available on the sight glass or if any
oil has been spilled out from the evacuation hole,
replacement of the motor is recommended.
3
Replacing of motors is described
in the repair chapter Motors on
page 503.
Product manual - IRB 6700 117
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
3 Maintenance
3.3.1 Inspecting the motor seal
Continued
To Next Page
Loading...
