Spare part
NoteArticle numberEquipment
The maintenance kit contains:
• End cover
• Radial sealing with
dust lip, 50x68x8 (2
pcs)
• O-ring 85x3
• Spherical roller bearing
• Washer
3HAC045815-001Spherical roller bearing kit
Consumables
NoteArticle numberEquipment, etc.
Located at the front link ear of the bal-
ancing device. 2 pcs required.
3HAA2166-12VK cover, 28x7
Tribol GR 100-0 PD, 50 ml3HAA1001-294Grease
Loctite 2433HAB7116-1Locking liquid
Required tools and equipment
NoteArticle numberEquipment, etc.
Only used to keep the balancing device
in a locked position, after the balancing
device springs has been unloaded with
the help of the robot itself.
DANGER
Never use this tool to unload or restore
a balancing device!
3HAC030662-001Distance tool
Used to unload or restore a balancing
device.
3HAC020902-001Hydraulic press tool, balan-
cing device
Used for removing and fitting shaft and
bearings.
3HAC028920-001Dismantle and mounting tool
To be used with the press tool.3HAC11731-1Hydraulic cylinder
To be used with the hydraulic cylinder.3HAC13086-1Hydraulic pump 80 MPa
Used to secure lower arm.-Lock screw, M16x120
SA-10-8-NA1-Lifting shackle
Lifting instruction 3HAC15880-2 en-
closed.
3HAC15556-1Lifting accessory (chain)
Used for removing and fitting shaft and
bearings.
3HAC028920-001Dismantle and mounting tool
Content is defined in section Standard
toolkit on page 829.
-Standard toolkit
Continues on next page
444 Product manual - IRB 6700
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
4 Repair
4.6.1 Replacing spherical roller bearing, link ear
Continued
To Next Page
Loading...
