NoteAction
xx1300002246
Insert 22 of the 24 M12 screws and wash-
ers.
6
xx1300002245
Remove the guide pins and fit the two re-
maining screws and washers.
7
M12, tightening torque: 120 NmSecure the upper arm by tightening the at-
tachment screws.
8
i
IRB 6700 - 235/2.65, IRB 6700 - 205/2.80, IRB 6700 - 175/3.05, IRB 6700 - 150/3.20
ii
IRB 6700 - 200/2.60, IRB 6700 - 155/2.85
iii
IRB 6700 - 300/2.70, IRB 6700 - 245/3.00
Securing the upper arm - IRB 6700 - 300/2.70, IRB 6700 - 245/3.00
NoteAction
CAUTION
The weight of the complete upper arm (in-
cluding the wrist) is
360 kg (IRB 6700 -235/2.65, -205/2.80, -
175/3.05, -150/3.20, -200/2.60, -155/2.85)
465 kg (IRB 6700 -300/2.70, -245/3.00)
All lifting accessories used must be sized
accordingly.
1
See Attaching lifting accessories to the
upper arm on page 228.
Attach the lifting accessories, if not already
fitted.
2
Lift the upper arm and bring it towards the
lower arm.
3
Continues on next page
Product manual - IRB 6700 765
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
4 Repair
4.8.5 Replacing the axis-3 gearbox
Continued
To Next Page
Loading...
