Example applicationMaterial
Coating of turning disc, calibration caps, quick
coupling, connectors, pins, sockets
Nickel
GearboxesOil, grease
Turning disc, gears, shafts, bearings, motors,
brackets, screws, washers
Steel
Protection tubes, protection covers, plugs, cable
jackets, cable filler, connectors
Thermo plastics
Motor winding, cable jackets, hoses, clamps,
dampers, o-rings, sealings, gaskets
Thermo setting polymers
Oil and grease
Where possible, arrange for oil and grease to be recycled. Dispose of via an
authorized person/contractor in accordance with local regulations. Do not dispose
of oil and grease near lakes, ponds, ditches, down drains, or onto soil. Incineration
must be carried out under controlled conditions in accordance with local regulations.
Also note that:
• Spills can form a film on water surfaces causing damage to organisms.
Oxygen transfer could also be impaired.
• Spillage can penetrate the soil causing ground water contamination.
Product manual - IRB 6710 617
3HAC085695-001 Revision: A
© Copyright 2023 ABB. All rights reserved.
8 Decommissioning
8.2 Environmental information
Continued
To Next Page
Loading...
