4.3.11 Inspecting the oil level in axis-5 gearbox
Location of the oil plug
The oil plug for inspection is located as shown in the figure.
xx2200002135
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit on page 628.
-Standard toolkit
Required consumables and wear parts
NoteArticle numberWear part
See Type of lubrication in gearboxes
on page 136.
-Lubricating oil
Used on oil plug. Always replace when
refitting oil plug.
3HAC061327-059O-ring, G 1/2"
Required documents
Document numberDocument name
3HAC042927-001Technical reference manual - Lubrication in gearboxes
Continues on next page
130 Product manual - IRB 6710
3HAC085695-001 Revision: A
© Copyright 2023 ABB. All rights reserved.
4 Maintenance
4.3.11 Inspecting the oil level in axis-5 gearbox