2 Installation and commissioning
2.6.5. Installation of position switches (option)
1273HAC022033-001 Revision: K
© Copyright 2004-2011 ABB. All rights reserved.
Illustration, adjust and secure cams
The illustration below show how to adjust and secure the position switch cams and profiles.
xx0100000113
Illustration, cutting the cam
The illustration below show how to cut the position switch cam.
xx0100000114
A Cam stop, M5 nut and M5 x 6 set screw
B Adjustable cam
C Profile
A Remove the gray section
Continued
Continues on next page
To Next Page
Loading...
