4 Repair
4.6.3. Replacement of motor, axis 3
3473HAC022033-001 Revision: K
© Copyright 2004-2011 ABB. All rights reserved.
4.
NOTE!
Keep the old top cover with the air nipple
mounted.
5. Continue removal of the motor unit, according to
step 6 and forwards in section Removal, motor on
page 343.
6. Fill the four screw recesses on the new motor with
Sikaflex. (After hardening, Sikaflex can be formed
with a knife)
xx0600002875
• A: Motor unit
• B: Sikaflex in screw
recesses
7. Continue to refitt the new motor according to
section, Refitting, motor on page 344.
8. Perform a leak test according to Inspection of air
hoses (Foundry Prime) on page 191.
Action Note
Continued
To Next Page
Loading...
