REG 316*4 1MRB520049-Uen / Rev. F ABB Switzerland Ltd
3-187
t-max
Maximum delay after being enabled regardless of inverse
characteristic. Operating characteristic constant.
t-Reset
Time taken to reset (from the operating limit). This corre-
sponds to the time taken by the machine to cool.
CurrentInp
defines the analogue current input channel.
All current inputs may be selected.
In the case of three-phase measurement, the first channel of
the group of three selected must be specified.
IB-Setting
Reference (base) current for compensating a difference in
relation to I
N
.
BlockInp
Binary address used as blocking input.
F: - Not blocked
T: - Blocked
xx: - all binary inputs (or outputs of a protection
function).
Trip
Output for signalling tripping.
Start
Output for signalling pick-up.
To Next Page
Loading...
