ABB REG316 4 Series - Descriptions of the Various Menu Items; Menu Item Edit Event. Dsc for Processing Event.dsc

REG 316*4 1MRB520049-Uen / Rev. E ABB Switzerland Ltd
5-127
5.14.4. Descriptions of the various menu items
5.14.4.1. Menu item ‘Edit Event. Dsc’ for processing Event.DSC
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
ÛABB Switzerland LtdÛÛÛÛÛÛÛÛÛÛÛÛExampleÛÛÛÛÛÛÛÛÛÛÛÛÛREG316*4 Generator TerminalÛ
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
ÛÉSMS EditÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»Û
ÛºRelay address = 45 CHANNEL = 21 Page 19 of 28 ºÛ
Ûº 45.021 Frequency ºÛ
ÛºCode Description Report Alarm Audible Reset ºÛ
Ûº 1 Blocked (U<) ON No No Yes Yes ºÛ
Ûº 2 Blocked (U<) OFF Report Yes No No ºÛ
Ûº 3 Trip ON Report Yes No No ºÛ
Ûº 4 Trip OFF Report Yes No No ºÛ
Ûº 5 Start ON Report Yes No No ºÛ
Ûº 6 Start OFF Report Yes No No ºÛ
Ûº ºÛ
Ûº ºÛ
Ûº ºÛ
Ûº ºÛ
Ûº ºÛ
Ûº ºÛ
Ûº ºÛ
Ûº ºÛ
ÛÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼÛ
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
ÛOn - Line 9600 bps SCS:SPAÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛV6.2b | V6.2bÛ
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
Fig. 5.117 A typical page of the Event.DSC file.
Default settings:
· Report = Report
· Alarm = Yes
· Audible = No
· Reset = NO.
The number displayed for ‘Relay address’ is the slave address
set for the relay and the one for ‘Channel’ the function number in
the parameter list. The function type is also shown in the header.
· Code = Event number
· Description = Event designation
· Report = An occurrence of an event is only listed in
the SMS010 report, if ‘Report’ is specified
in this column.
· Alarm = Determines whether an alarm appears in
the list or not.
· Audible = ‘Yes’ in this column causes the acoustic
alarm to be given as well.
· Reset = Reset function (Yes/No).