ABB REG316 4 Series - Diagnosis Information; Diagnostics Menu; Disturbance Recorder List

REG 316*4 1MRB520049-Uen / Rev. E ABB Switzerland Ltd
5-119
5.13.8.4. Disturbance recorder list
The menu item ‘Disturbance recorder’ opens a list with the data
stored in the disturbance recorder. Where there are several en-
tries, they can all be viewed using the arrow keys “v” and “
^
”.
The oldest record is displayed first when the list is opened. ‘0
events’ is displayed if no disturbance recorder data is stored.
-Disturb.Rec.
Event 1
98–03-17
13:55;56.575
â
Fig. 5.106 List of disturbance records
5.13.8.5. Diagnostics menu
This menu item gives access to the different kinds of diagnostic
information that can be viewed. The name “Diagnosis Menu” is
in the header and the list of menu items below.
The following kinds of information are available for selection:
· DiagnosisInfo
· IBB StatusInfo
· ProcessbusInfo
· LED descriptions.
-Diagnosis Menu-
DiagnosisInfo
IBB–StatusInfo
ProcessbusInfo
â
Fig. 5.107 Diagnostics
5.13.8.5.1. Diagnosis information
Selecting this menu item displays the diagnostic information in a
similar form to the HMI on the PC. The name “DiagnosisInfo” Is
in the header and the diagnostic information is displayed on the
three lines below. The entire list can be viewed using the arrow
keys “
^
” and “v”.