ABB REG316 4 Series - Load SCS Mask

ABB Switzerland Ltd REG 316*4 1MRB520049-Uen / Rev. C
6-14
6.11. Load SCS mask
This menu item provides facility to import a form (mask) from a
file that was created using the MMI documentation function to
configure the transfer of events via the SCS.
Part of a file of this kind is given below. In this case, the file only
contains text and it can therefore be edited if necessary using a
normal editor. Every possible event is listed with channel and
event number (see Index 9). “OFF” means that an event is
“masked”, i.e. it cannot be transferred to be recorded as an
event. Conversely “ON” that it is transferred and recorded. The
file is created automatically be the MMI and enables all the
events that have been configured.
Extract from the file “recxx.evt”:
0E1 OFF
0E2 OFF
0E3 OFF
0E4 OFF
0E5 OFF
0E6 OFF
0E7 OFF
0E8 OFF
......