ABB REG316 4 Series - Changing a Function Comment; Changing the Settings of a Function

REG 316*4 1MRB520049-Uen / Rev. E ABB Switzerland Ltd
5-23
5.5.1.1. Changing the settings of a function
Function settings are changed using the “Edit function parame-
ters” window. How this is done for the different kinds of parame-
ters is explained in Sections 5.5.3. and 5.5.4.
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
ÛABB Switzerland LtdÛÛÛÛÛÛÛÛÛÛÛÛExampleÛÛÛÛÛÛÛÛÛÛÛÛÛREG316*4 Generator TerminalÛ
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
ÛÉEdit Function ParametersÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»Û
Ûº ºÛ
Ûº Func Nr 1 - Current-DT * * ºÛ
Ûº ºÛ
Ûº ParSet4..1 P1 Select ºÛ
Ûº Trip B00000000 ºÛ
Ûº Delay 01.00 s ºÛ
Ûº I-Setting 02.00 IN ºÛ
Ûº MaxMin MAX (1ph) Select ºÛ
Ûº NrOfPhases 001 ºÛ
Ûº CurrentInp 1 AnalogAddr ºÛ
Ûº BlockInp F BinaryAddr ºÛ
Ûº Trip ER SignalAddr ºÛ
Ûº Start ER SignalAddr ºÛ
Ûº RETURN/ENTER ºÛ
Ûº ºÛ
Ûº ºÛ
Ûº ºÛ
ÛÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼÛ
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
ÛOn - Line 9600 bps SCS:SPAÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛV6.2b | V6.2bÛ
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
Fig. 5.3 c Edit function parameters
5.5.1.2. Changing a function comment
The “Edit function comment” window provides facility for entering
a comment of up to 25 characters. Press <ENTER> to terminate
the input. A comment either complements or replaces the func-
tion name in all windows. A comment that is no longer needed is
deleted in the same window using the space bar. Comments are
downloaded to the device together with the settings.