ABB REG316 4 Series - Menu Item Edit Logging. Dsc for Processing Logging.dsc

REG 316*4 1MRB520049-Uen / Rev. E ABB Switzerland Ltd
5-129
5.14.4.2. Menu item ‘Edit Logging. Dsc’ for processing Logging.DSC
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
ÛABB Switzerland LtdÛÛÛÛÛÛÛÛÛÛÛÛExampleÛÛÛÛÛÛÛÛÛÛÛÛÛREG316*4 Generator TerminalÛ
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
ÛÉLogging EditÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»Û
Ûº Page 1 of 2 ºÛ
Ûº Code Addr Parameter description Show logging ºÛ
Ûº 14V1 45 Value of Addr. 45 Current-DT IN Yes ºÛ
Ûº 15V1 45 Value of Addr. 45 Current-DT IN No ºÛ
Ûº 17V1 45 Value of Addr. 45 UIfPQ UN No ºÛ
Ûº 17V2 45 Value of Addr. 45 UIfPQ IN No ºÛ
Ûº 17V3 45 Value of Addr. 45 UIfPQ P (PN) No ºÛ
Ûº 17V4 45 Value of Addr. 45 UIfPQ Q (PN) No ºÛ
Ûº 17V5 45 Value of Addr. 45 UIfPQ Hz No ºÛ
Ûº 18V1 45 Value of Addr. 45 Frequency Hz No ºÛ
Ûº 18V2 45 Value of Addr. 45 Frequency UN No ºÛ
Ûº 20V1 45 Value of Addr. 45 Delay s No ºÛ
Ûº 21V1 45 Value of Addr. 45 Frequency Hz No ºÛ
Ûº 21V2 45 Value of Addr. 45 Frequency UN No ºÛ
Ûº 22V1 45 Value of Addr. 45 Distance [refLength] No ºÛ
Ûº 22V2 45 Value of Addr. 45 Distance Z (RE) No ºÛ
Ûº 22V3 45 Value of Addr. 45 Distance Z (RE) No ºÛ
ÛÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼÛ
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
ÛOn - Line 9600 bps SCS:SPAÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛV6.2b | V6.2bÛ
ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ
Fig. 5.118 A typical page in a logging file
After creating the Logging.dsc file, all the parameters are at the
default setting ‘No’ in the ‘Show Logging’ column.
Meanings of the columns:
· Code = Number of the measured vari-
able.
· Addr = Relay slave address.
· Parameter description = Description of the measured
variable. This description also
appears in the logging window of
the SMS010 report.
· Show logging = Only measured variables with
‘Yes’ in this column appear in
the SMS010 report.
The ‘Show logging’ parameter can be changed using the space
bar once they have been selected (Yes/No). None of the other
settings can be changed. The ‘Reporting’ function’ can list a
maximum of 16 measured variables.
Refer to the Section ‘Reporting’ in the SMS010 manual for a
detailed explanation of the settings.