ABB REG316 4 Series - Page 368

ABB Switzerland Ltd REG 316*4 1MRB520049-Uen / Rev. F
3-330
D. Current plausibility function settings - Check-I3ph
Summary of parameters:
Text Units Default Min. Max. Step
ParSet 4..1 P1 (Select)
Trip 00000000
I-Setting IN 0.20 0.05 1.00 0.05
Delay s 10.0 0.1 60.0 0.1
CT-Compens 01.00 -2.00 +2.00 0.01
CurrentInp CT/VT-Addr 0
SumInp. CT/VT-Addr 0
BlockInp BinaryAddr F
Trip SignalAddr ER
Explanation of parameters:
ParSet 4..1
Parameter for determining in which set of parameters a par-
ticular function is active (see Section 5.11.).
Trip
Definition of the tripping logic (matrix) excited by the
function’s O/P.
I-Setting
Current setting for tripping.
Delay
Time between start signal at the I/P and the tripping signal at
the O/P.
Forbidden settings:
£ 1 s for current settings £ 0.2 I
N
.
CT-Compens
Amplitude compensation factor for the residual current I/P,
enabling different transformation ratios of the main c.t’s for
phase and residual currents to be equalised.
The polarity of the residual current can be reversed by enter-
ing negative values.