ABB REG316 4 Series - Page 488

ABB Switzerland Ltd REG 316*4 1MRB520049-Uen / Rev. E
5-44
Top: 1...32 : Channel No.
Bottom: X : selected channel (<Ins> key)
I : selected channel inverted (<-> key).
The SCS assignment (e.g. -SCSI2104) is indicated in the pa-
rameter value column of the “Edit function parameters” window.
xSCSIyyzz: x = non-inverted ( ) or inverted (-) input
yy = SCS group number (1...24)
zz = data node within the group (1...32).
RBI input (distributed input system)
Every function input can be assigned to an RBI input in either an
inverted or non-inverted sense. The respective group (1 to 80) is
first selected in the “Select RBI No.” window, after which the “In-
puts from RBI” appears:
ÚSelect Binary InputÄÄÄ¿
³ ÉInput from RBI'sÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
³ AlÚSelect RBºBIM-Module º
³ Al³ ºÚÄÄÚÄÄÚÄÄÚÄÄÚÄÄÚÄÄÚÄÄÚÄÄÚÄÄÚÄÄ¿º
³ Bi³ > 21 º³ 1³ 2³ 3³ 4³ 5³ 6³ 7³ 8³ 9³10³º
³ Ou³ º³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³º
³ In³ Usable RºÀÄÄÀÄÄÀÄÄÀÄÄÀÄÄÀÄÄÀÄÄÀÄÄÀÄÄÀÄÄÙº
³ In³ ºÚÄÄÚÄÄÚÄÄÚÄÄÚÄÄÚÄÄÚÄÄÚÄÄÚÄÄ¿ º
³ In³ 1..80º³11³12³13³14³15³16³17³18³19³ º
³ RE³ º³X ³ ³ ³ ³ ³ ³ ³ ³ ³ º
³ ÀÄÄÄÄÄÄÄÄĺÀÄÄÀÄÄÀÄÄÀÄÄÀÄÄÀÄÄÀÄÄÀÄÄÀÄÄÙ º
ÀÄÄÄÄÄÄÄÄÄÄÄÄĺ º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Fig. 5.21 “Select RBI group” and “Inputs from RBI” selection
windows
The fields in the RBI input selection window are designated as
follows:
Top: 1...19 : Channel No.
Bottom: X : selected channel (<Ins> key)
I : selected channel inverted (<-> key).
The RBI assignment (e.g. -R12111) is indicated in the parameter
value column of the “Edit function parameters” window.
xRIyyzz: x = non-inverted ( ) or inverted (-) input
yy = RBI device No. (1…80)
zz = input in the device (1...19).