ABB Switzerland Ltd REG 316*4 1MRB520049-Uen / Rev. E
5-46
Top: 1...49 : Channel No.
Bottom: X : selected channel (<Ins> key)
I : selected channel inverted (<-> key).
The ITL assignment (e.g. -ITL2225) is indicated in the parameter
value column of the “Edit function parameters” window.
xITLyyzz: x = non-inverted ( ) or inverted (-) input
yy = ITL group No. (1…64)
zz = data node within the group (1...49).
Note:
A signal is available at input No. 49 that indicates that the re-
spective device is active or not (“1” respectively “0”).
To Next Page
Loading...
