ABB REG316 4 Series - Page 670

Numerical generator protection
ABB Switzerland Ltd
Utility Automation
REG316*4
1MRK502004-Ben
Page 42
Example of an
order
• Rated current 1 A, rated voltage 100 V
AC
• 3 phase voltages, 6 phase currents
• 110 V DC
aux. supply
• 4 heavy duty relays (3 tripping, 1 CB clos-
ing) 20 signalling relays
• 8 opto-coupler inputs (110 V
DC
)
• 1 relay for 19" rack mounting
• Communication with the station control
system (e.g. LON)
• Operator program on CD
The corresponding order is as follows:
• 1 REG316*4, HESG448750M0004
• 110 V DC
aux. supply
• Opto-coupler input voltage 110 V
DC
• Rated current 1 A
• Rated voltage 100 V AC
• 1 mounting kit HESG324310P1
• 1 PC card LON
• 1 CD, RE.216 / RE.316*4
1MRB260030M0001
• 1 PC connecting cable (if not already
available) 1MRB380084-R1
Alternatively, the relay ID code may be given
instead. In this case the order would be:
• 1 REG316*4, A1B0C1D0U1K63E2I-
3F2J3Q0V0R0W0Y1N1M1SR200T0
• 1 mounting kit HESG324310P1
• 1 CD, RE.216 / RE.316*4
1MRB260030M0001
• 1 PC card HESG448614R1
• 1 PC connecting cable (if not already
available) 1MRB380084-R1
Relay ID codes are marked on all relays. The
significance of the sub-codes can be seen
from Table 48.
References Operating instructions (printed) 1MRB520049-Uen
Operating instructions (CD) 1MRB260030M0001
Reference list REG316/REG316*4 1MRB520210-Ren
CAP316 Data sheet 1MRB520167-Ben
REX010/011 Data sheet 1MRB520123-Ben
Test Set XS92b Data sheet 1MRB520006-Ben
SigTOOL Data sheet 1MRB520158-Ben
RIO580 Data sheet 1MRB520176-Ben
The Operating instructions are available in English or German.
(Please state when ordering).