REG 316*4 1MRB520049-Uen / Rev. E ABB Switzerland Ltd
9-89
9.6.56. FUPLA 59
Basic channel No.: 14
Summary of parameters:
Address Access Text Unit Default Min. Max. Step
14S4 R ParSet4..1 <Select> P1 00000010B 00011110B
14S8 R NoFUPMV x 0 0 1
14S9 R RepRate x low (2) low (2) high (0) 1
14S10 R CycleTime x 20 0 1000 1
Measured variables
The number of FUPLA measured variables depends on the con-
figuration. Within this total configured, the order of the FUPLA
measured variables measured variable numbers can be deter-
mined by assigning numbers to them.
Address Access Text Dec.
14V1 R FUPMV 1 2
14V2 R FUPMV 2 2
14Vn R FUPMV n 2
Events
FUPLA events can only be configured as IBB events. Events are
not recorded under the FUPLA function number. Because of the
variable number of signals/events, FUPLA would require a vari-
able number of channels.
IBB events
FUPLA ‘Extout’ to IBB channel and ER:
Events are recorded under their SPA address, IBB group and
event number,
Addr 121 E1 .
Binary signals are assigned to IBB channels using the HMI. It is
not possible to mask IBB events.
To Next Page
Loading...
