Table 6: Available actions on the user interface
Action Description
Read Clicking the Read button reads all available fault records from the protection relay into
the tool. User has the option to read 1 fault record, 20 fault records or all fault records.
The Read button opens up a progress bar to indicate an ongoing read operation.
Click the Cancel button on the Read progress bar to cancel the read operation. On
operation completion, the available fault records are shown in the record grid.
Click the + icon to expand and view record details.
Save
Click Save to save the fault records on the local machine as .txt file.
Clear Record can be cleared from either the Fault record tool or the protection relay or both.
Before deleting the records, a confirmation dialog box is shown.
Close Clicking the Close button closes this instance of the Fault Record tool. Any open
instance is finally closed when the whole PCM600 is closed.
File File menu for Save and Exit actions.
Edit Copy All in the Edit menu allows to copy all the fault records which can then be pasted
to a word processor and saved on the local machine without having to save the records
as a .txt file.
Additionally the user can select any particular fault record and right-click to copy the
selected record.
5.6 IED Compare
IED Compare is used to compare the IED configuration of two same type of IEDs. It
generates a text report which lists the differences in the IED configuration. IED Compare
provides an option to compare an IED configuration stored in PCM600, IED or .pcmi file.
IED Compare can compare certain types of IED configurations and parameters.
• Application configuration
• Display configuration
• GOOSE receive configuration
• Parameters
Application comparison also compares the system function blocks.
Display comparison compares two display pages with a delta of two
pixels.
1MAC108982-MB E Section 5
Protection and control engineering
615 series ANSI 99
Engineering Manual
To Next Page
Loading...
