• Right-click the Plant Structure view, point to New and select Create from
Template.
• Right-click the Plant Structure view, point to New and select General and
select the element either IED Group or Substation.
2. On the View menu, select Object Types.
3. Select the needed elements and drag them into the plant structure.
GUID-E856B2E2-8200-46FC-AA98-878F70C20A96-ANSI V1 EN
Figure 20: The start of a project with IEDs placed but not renamed
4. Rename each level in the structure by the names/identifications used in the grid.
• Right-click the level and select Rename.
• Rename the levels in the Object Properties view.
4.3 Inserting an IED
The context menu or the Object Types view shows the available IEDs that can be inserted,
on the bay level, into the plant structure according to the installed connectivity package.
It is possible to do various tasks in the plant structure.
1MAC108982-MB E Section 4
Setting up a project
615 series ANSI 47
Engineering Manual
To Next Page
Loading...
