GUID-2A8CE4A6-1AA7-4129-A1B5-A739D4BCA4B7 V3 EN
Figure 31: Configuration mode selection wizard
3. On the Order Code selection page, select the correct order codes and click Next.
Ensure that the order code is correct. PCM600 verifies later that the
order code matches with the relay. If the order code digits related to
the configuration, I/O or version do not match with the relay,
PCM600 does not allow writing the configuration to the device. If
other digits in the order code do not match, PCM600 informs about
the mismatch with a dialog.
Figure 32: Order code selection
4. On the Configuration Selection Page, select the configuration type and click
Next.
1MAC108982-MB E Section 4
Setting up a project
615 series ANSI 59
Engineering Manual
To Next Page
Loading...
