IEC 61850 or function
name
ANSI Function description Transformer
RET670
(Customized)
MULTICMDRCV,
MULTICMDSND
Multiple command and transmit 60/10
OPTICAL103 IEC 60870-5-103 Optical serial communication 1
RS485103 IEC 60870-5-103 serial communication for RS485 1
AGSAL Generic security application component 1
LD0LLN0 IEC 61850 LD0 LLN0 1
SYSLLN0 IEC 61850 SYS LLN0 1
LPHD Physical device information 1
PCMACCS IED configuration protocol 1
SECALARM Component for mapping security events on protocols such as DNP3
and IEC103
1
FSTACCS Field service tool access 1
IEC 61850-9-2 Process bus communication, 8 merging units 0-1
ACTIVLOG Activity logging 1
ALTRK Service tracking 1
PRP IEC 62439-3 Parallel redundancy protocol 0-1
HSR IEC 62439-3 High-availability seamless redundancy 0-1
PTP Precision time protocol 1
FRONTSTATUS Access point diagnostic for front Ethernet port 1
SCHLCCH Access point diagnostic for non-redundant Ethernet port 6
RCHLCCH Access point diagnostic for redundant Ethernet ports 3
DHCP DHCP configuration for front access point 1
QUALEXP IEC 61850 quality expander 96
Remote communication
BinSignRec1_1
BinSignRec1_2
BinSignReceive2
Binary signal transfer receive 3/3/6
BinSignTrans1_1
BinSignTrans1_2
BinSignTransm2
Binary signal transfer transmit 3/3/6
BinSigRec1_12M
BinSigRec1_22M
BinSigTran1_12M
BinSigTran1_22M
Binary signal transfer, 2Mbit receive/transmit 3
LDCMTRN Transmission of analog data from LDCM 1
LDCMTRN_2M Transmission of analog data from LDCM, 2Mbit 6
LDCMRecBinStat1
LDCMRecBinStat2
LDCMRecBinStat3
Receive binary status from remote LDCM 6/3/3
Table continues on next page
Section 3 1MRK 504 165-UUS -
Available functions
42 Transformer protection RET670 2.2 ANSI
Commissioning manual
To Next Page
Loading...
Need help?
General
