To Next Page

To Previous Page

IEC13000060-1-en.vsd

IEC13000060 V1 EN

Figure 6: Select the TCP/IPv4 protocol and open Properties

5. Select Use the following IP address and define IP address and Subnet mask if the

front port is used and if the IP address is not set to be obtained automatically by the

IED, see

Figure 7. The IP address must be different from the IP address chosen for the

IED.

1MRK 504 165-UUS - Section 4

Starting up

Transformer protection RET670 2.2 ANSI 51

Commissioning manual

Other manuals for ABB RET670

Questions and Answers:

Need help?

Do you have a question about the ABB RET670 and is the answer not in the manual?

General

Rated Frequency	50/60 Hz
Inputs	Analog and binary inputs
Application	Protection of power systems
Communication Protocols	IEC 61850, DNP3, Modbus
Operating Temperature Range	-25°C to +55°C
Mounting	Rack mounted
Number of Binary Inputs	Up to 48
Number of Binary Outputs	32
Protection Functions	Overcurrent Protection
Outputs	Binary outputs
Enclosure	IP 54
Type	Line Differential Protection
Number of Analog Inputs	24