ScreenMaster RVG200
Paperless recorder 7 Configuration
110 OI/RVG200-EN
Count range
Preset count Set the value the F0 value calculation counts from and the value applied
when the F0 count is reset.
Predetermined count Set the value at which the F0 count stops or wraps.
Note.
The Preset count value must be lower than the Predetermined count
value.
Set the required number of decimal places on the Predetermined
count
value.
Intermediate count Set the value at which a digital source is activated. This can be used as an
alarm threshold to indicate when the Predetermined count value is about to
be reached.
Log update
Log update time Select the frequency with which F0 values are added to the Totalizer log.
Log update time Log updated every...
5, 10, 15,
30, 60, 90 secs
5, 10, 15, 30... seconds past the hour
3 min 0, 3, 6, 9... minutes past the hour
5 min 0, 5, 10, 15... minutes past the hour
10 min 0, 10, 20, 30,... minutes past the hour
15 min 0, 15, 30, 45 minutes past the hour
20 min 0, 20, 40 minutes past the hour
30 min 0, 30 minutes past the hour
60 min On the hour
2 hrs Midnight, 2am, 4am,...
3 hrs Midnight, 3am, 6am,...
4 hrs Midnight, 4am, 8am,...
8 hrs Midnight, 8am, 4pm,...
12 hrs Midnight, 12am
24 hrs Midnight
To Next Page
Loading...
