ScreenMaster RVG200
Paperless recorder Appendix E – Batch recording
OI/RVG200-EN 175
Field 1
Field 2
Field 3
Note. These fields are editable only if defined during configuration – see
page 179.
Touch the relevant button to modify each field. A list box is displayed to
enable to operator to either select a previously defined entry (maximum 10) or
to define a new entry (maximum 18 characters per field.
Note. Batch information can also be entered easily into the recorder using a
USB barcode scanner or keyboard.
Operator The operator's name is displayed if Operator login is not set to Disabled –
see page 178.
Touch to accept changes and start batch recording. Touch to
return to the chart view without starting batch recording.
To Next Page
Loading...
