ScreenMaster RVG200
Paperless recorder 7 Configuration
OI/RVG200-EN 77
Note. The following parameters are displayed only if Security system is set to Advanced – see
Section 7.7.5, page 74.
User 1 Name Configure User 1 (System Administrator)
User 1 Access Select e-Sign, Logging, Batch (see Appendix E, page 173) and Alarm
acknowledge access privileges as required (see also page 78).
Note. Full Configuration level access privileges for User 1 cannot be
disabled.
User 1 Password Enter a password for User 1.
View/Edit Other Users The System Administrator (User 1) can view and / or change the user
name, access privileges and password for any other user. Select the user
to be viewed / edited.
User 2 (to 12) Name Enter a name for the selected user.
To Next Page
Loading...
