ScreenMaster RVG200
Paperless recorder 7 Configuration
78 OI/RVG200-EN
User 2 (to 12) Access Set access privileges for selected user.
e-Sign
Logging
Batch
Configuration
(No access)
Configuration
(Load)
Configuration
(Ltd)
Configuration
(Full)
Alarm
acknowledge
–
–
–
–
–
–
–
–
The selected user is able to enter an electronic
signature.
The selected user is able to access the Logging level.
The selected user is able to start and stop batch
recording – see Appendix E.2, page 174.
The selected user is unable to access the
Configuration level.
The selected user is unable to make any configuration
changes but can load preset configurations from
external media.
The selected user is able to:
Change alarm trip points, hysteresis and time
hysteresis settings.
Make input adjustments for analog input
boards.
Load configurations from external media only.
The selected user is allowed full configuration access
with the exception of access to the Security settings.
The selected user is able to acknowledge alarms.
Note. The System Administrator (User 1) only is able
to change the Security settings.
User 2 (to 40) Password Enter an initial password for the selected user.
Note. The user may subsequently change this password.
To Next Page
Loading...
