3-25
Questions? Refer to Page 11-22 For Technical Support Instructions.
What You See on the Display What You Do Comments
4. If prompted, scan or manually enter the
comment code and press Enter.
If there is no prompt to enter a
comment code skip down to step 5.
The meter may be enabled to scan or enter a
1- to 2-digit comment code.
The meter may display out-of-range results
similar to those for Glucose if enabled for
ketone testing.
The meter may be also be enabled to scan or
enter up to two free text information fields.
5. You can select one of the following
options:
Press 1 – Next Patient.
Press 2 – Patient History.
Press Menu to return to Menu Mode
menu.
Press On/Off to turn off the meter.
Remove the test strip from the meter
and discard it when finished testing.
Follow your facility’s biohazard disposal
policy.
The display shows:
Patient ID or Name (p: prompt)
Comment Code (Number in box)
Date and Time of test
Test Type (Ketone)
If 1 is selected, the Scan Patient ID screen
will appear. Continue with testing on the
next patient.
If 2 is selected, the meter will display the last
test result for this patient as well as allow
you to view previous results.
Chapter 3: Patient Test
To Next Page
Loading...
