4-13
Questions? Refer to Page 11-22 For Technical Support Instructions.
Chapter 4: Control Test
What You See on the Display What You Do Comments
5. You may select one of the following:
Press 1 – Next Level.
Press 2 – Repeat Test.
Press Menu to return to the Menu
Mode menu.
Press On/Off to turn off the meter.
Remove the test strip from the meter
and discard it when finished testing.
Follow your facility’s waste disposal
policy.
The display shows:
Level (Low, Mid, High)
Comment Code (Number in box)
Test Type (Ketone)
Date and Time of test
Operator ID (o: prompt)
Note that test date and time alternates with
Operator ID.
If 1 is selected, the Scan or Enter Control
Lot screen will appear. Return to step 1 to
perform the Next Level of control test.
If 2 is selected, the Scan or Enter Strip Lot
screen will appear. Repeat the test.
To Next Page
Loading...
