5-3
Questions? Refer to Page 11-22 For Technical Support Instructions.
What You See on the Display What You Do Comments
3. Press 1 to select Data Review.
4. Press Scan to scan the Operator ID
barcode or manually enter the Operator
ID via the keypad, then press Enter.
While the Operator ID may be up to 30
digits, not all digits will fit on the display.
The meter may also be set to truncate
(ignore) leading, trailing, and/or selected
digits of the barcode.
5. Choose the category of data to review.
Chapter 5: Data Review
To Next Page
Loading...
