6-8
Questions? Refer to Page 11-22 For Technical Support Instructions.
Chapter 6: Proficiency Test
What You See on the Display What You Do Comments
3. Wait for the meter to analyse the sample
and display the test result.
The meter counts down then displays the
test result. If an error is detected during
the assay, the assay is terminated and no
result is displayed. Once the assay begins,
all key presses are ignored until the assay is
completed.
4. If required, scan or manually enter the
comment code and press Enter. If there
is no prompt to enter a comment code,
skip down to step 5.
If the comment code option is enabled in
the patient test configuration through the
data management system, the meter will
be enabled to scan or enter a 1 or 2 digit
comment code.
To Next Page
Loading...
