Abbott i-STAT 1 System Manual

13
Art: 730077-00B Rev. Date: 14-Mar-12
Note 7.2: The Control Test Settings feature is also customizable through the i-STAT 1 handheld
keypad.
1. Power on the i-STAT 1 handheld and press MENU to get to the Administration
Menu
2. Press 4 – Customization
3. Press 2 – Change
4. Type in your password and press ENT (If no password is set, just press ENT)
5. Press 4 – QC Tests
6. Press 2 – Cartridge QC
7. Press 2 to set Comment Codes for in range results or press 3 to set Comment
Codes for out of range results
8. Select the way in which you would like control results to be displayed.
• Numeric: liquid QC results are displayed in numeric format
• Suppressed: the following symbol “< >” is displayed next to each liquid QC test name
in place of the quantitative (numeric) results.
Note 8.1: The “Suppressed” option should only be chosen if “Auto via eVAS” is chosen
for the liquid QC Pass/Fail Determination.
Note 8.2: The Control Results Display Format feature is also customizable through the
i-STAT 1 handheld keypad.
1. Power on the i-STAT 1 handheld and press MENU to get to the
Administration Menu
2. Press 4 – Customization
3. Press 2 – Change
4. Type in your password and press ENT (If no password is set, just press ENT)
5. Press 4 – QC Tests
6. Press 2 – Cartridge QC
7. Press 4 to set Result Format
9. Select the method in which control lot number information will be entered into the handheld.
• Scan or Enter: allows the user the option of manually entering the liquid QC lot
information into the handheld, or scanning it from the barcode on the quality control vial
being tested.
• Scan only: the fluid lot information must be entered by scanning the barcode on the
control vial being tested.

Abbott i-STAT 1 Specifications

General

Brand	Abbott
Model	i-STAT 1
Category	Measuring Instruments
Language	English