Art: 728690-00D Rev. Date: 02-Aug-12
16
11. Expand “Ports (COM & LPT)” to list all the COM Ports (as shown above). The newly installed
DRC port is named “USB Serial Port”.
12. Right click on the “USB Serial Port” device entry and select Properties. A “USB Serial Port
Properties” dialog box will open. Select the Port Settings tab.
13. Using the drop down menu, set the “Bits per second” to 38400. Other drop down menus
should remain as the default.
14. Click Advance Settings. Using the drop down menu, change the port number to the lowest
available number. Determine availability by viewing the existing comports in Device Manager.
Click OK twice.
15. Close all Control Panel windows.
Option 2: Installation Using a Driver Installer File
Note: If a CD-ROM with the USB driver has been obtained, proceed to Step 3 below. If not,
continue with Step 1.
1. Using Internet Explorer or another browser, navigate to http://www.abbottpointofcare.com/
Customer-Support.aspx.
2. The following link is listed under the “Useful Customer Information” section
:
• USB Driver for DRC-300 Downloader/Recharger
To Next Page
Loading...
Need help?
General
