7 - 7
Art: 714369-00H Rev. Date: 03-Aug-12
SPECIFICATIONS
Dimensions
Height: 72.5mm
Width: 136mm
Depth: 120mm
Weight 500g (Approx.)
Power
1. 4.8V NiMH rechargeable battery pack
2. Power adaptor for AC outlet
Communication Link
1. Infra-red
2. RJ12
Paper 5.7cm thermal
Buttons
1. On/Off
2. Paper Feed
LED Indicators
POWER: Green/Orange/Red
STATUS: Green/Orange/Red
Printing Method Thermal line printing
Printing Speed
Battery: Up to 10 lines per second
AC Adaptor: Up to 2.5 lines per second
Temperature
Operating: 15ºC to 40ºC
Storage: -20ºC to 50ºC
Printer Power Requirements
The printer is rated at:
• 12Vdc
• 1.5A max
• 18W
External Power Supply Unit (PSU)
The external PSU is rated at:
• 100-240Vac
• 50-60Hz
Fuses
There are no operator replaceable fuses with
the i-STAT Printer.
Note: This product has been tested to the requirements of CAN/CSA-C22.2 No. 61010-1, second edition,
including Amendment 1, or a later version of the same standard incorporating the same level of testing
requirements.
To Next Page
Loading...
Need help?
General
