Rev. Date: 07/18/06 Art: 714384-00D 22-25
OPERATOR WORKSPACE
Overview
This workspace is used to:
• Record operator names and identification numbers
• Record certification dates and certification expiration dates
• Assign operators to departments
• Add comments
When the i-STAT 1 Analyzer is customized to use the operator list created here,
the analyzer can be customized to warn or lockout operators if they are not on
the list or their certification has expired.
Operators
Operators are listed by Department and Method as indicated by thesymbol.
Operators are added to the operator list by department and by method.
When a record is received with an Operator ID that is not listed in any
Department, the operator is placed in the “Unassigned” department.
Operator list edit in progress
When editing the operator list, check this box to delay updating i-STAT 1
analyzers until all editing is complete. When editing is complete, click the
box to remove the checkmark. This box will appear when Serial or Network
Communications are enabled, Customization is enabled and Use Operator List
is enabled.
To Next Page
Loading...
