Abbott i-STAT 1

For additional information on
running the electronic simulator,
please see:
• Section 14 of the i-STAT 1
System Manual, or
• The Introduction and Start-up
section of the i-STAT System
Manual for Waived Tests
If PASS is not displayed,
re-run the Electronic Simulator.
If the repeated Electronic
Simulator attempt fails, please
contact APOC Technical Support.
Art: 725708-00E Rev. Date 07-FEB-12 15
Run the Electronic Simulator in the newly
updated Handheld.
When the simulator finishes, PASS will be displayed.
Congratulations. The process for updating an
additional i-STAT 1 Handheld is complete.
If there are other i-STAT 1 Handhelds to update,
repeat steps through
If there are no other Handhelds to update, the process
is complete.
2.9
2.92.2
Verifying Software Update
Handheld-to-Handheld