EasyManua.ls Logo

Abbott i-STAT 1

Abbott i-STAT 1
658 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PROCEDURE MANUAL FOR THE i-STAT SYSTEM
14
REV. DATE: 16-Oct-12 ART: 714446-00L
ANALYTE UNIT REFERENCE RANGE
(arterial) (venous)
REPORTABLE
RANGE
UNIT CONVERSION
Hematocrit
%PCV
Fraction
38 – 51 38 – 51
0.38 – 0.51 0.38 – 0.51
10 – 75
0.10 – 0.75
% PCV x 0.01 =
Volume fraction
Example:
40% PCV = 0.40 PCV
Lactate
mmol/L
mg/dL
0.36 –1.25 0.90-1.70
3.2 – 11.3 8.1–15.3
0.30 – 20.00
2.7 – 180.2
mmol/L x 9.01 = mg/dL
HCO
3
*
mmol/L (mEq/L) 22 – 26 23 - 28 1.0 – 85.0 mmol/L x 1 = mEq/L
TCO
2
*
(on all cartridges
but CHEM8+)
mmol/L (mEq/L)
23 – 27 24 - 29
5 – 50
mmol/L x 1= mEq/L
BE*
mmol/L (mEq/L) (-2) – (+3) (-2) – (+3) (-30) – (+30)
Anion Gap*
mmol/L (mEq/L) 10 – 20 10 – 20 (-10) – (+99)
sO
2
*
% 95 – 98 0 - 100 % x 0.01 = fraction
saturated
Hb*
g/dL
g/L
mmol/L
12 – 17 12 – 17
120 – 170 120 – 170
7 – 11 7 – 11
3.4 – 25.5
34 – 255
2.1 – 15.8
g/dL x 10 = g/L
Celite ACT
seconds
74 – 125 (PREWRM) 74 – 125 (PREWRM)
84 – 139 (NONWRM) 84 – 139 (NONWRM)
50 - 1000
Kaolin ACT
seconds
74 – 137 (PREWRM) 74 – 137 (PREWRM)
82 – 152 (NONWRM) 82 – 152 (NONWRM)
50 - 1000
Prothrombin
Time/PT
INR 0.9-8.0
#
Troponin I/cTnI
ng/mL (µg/L) 0.00 – 0.03**
0.00 – 0.08***
0.00 –50.00
##
ng/mL x 1 = µg/L
Creatine
Kinase
MB/ CK-MB
ng/mL (µg/L)
0.0 – 3-5**** 0.0-150.0
ng/mL x 1 = µg/L
B-Type
Natriuretic
Peptide/BNP
pg/mL (ng/L) <15-50**** 15-5000 pg/mL x 1 = ng/L
*Calculated values.
#Performance characteristics have not been established for INRs above 6.0.
**Represents the 0 – 97.5% range of results. Each facility should establish it’s own reference range using the i-STAT cTnI assay.
##
Performance characteristics have not been established for cTnI values above 35.00 ng/mL.
***Represents the 0-99% range of results. Each facility should establish it’s own reference range using the i-STAT cTnI assay.
****Represents the 0-95% range of results. Each facility should establish it’s own reference range using the i-STAT assay

Table of Contents

Other manuals for Abbott i-STAT 1

Related product manuals