7 - 5
Art: 714369-00H Rev. Date: 03-Aug-12
Troubleshooting
Printer not printing. Power LED on and Status LED off:
check that results are displayed or that results have been selected from
List under Data Review.
check that that distance between analyzer and printer, if printing
directly from the analyzer, is not too short or too long.
perform printer self test to ensure that printer is functioning. Turn the
printer on while pressing the Paper Feed button, then release the Paper
Feed button and ensure that the printout is clear.
Paper is feeding but nothing is printed: check that the paper is feeding from
under the roll.
Printer not printing and Status light on continuously: battery needs to be
recharged.
Printer Power LED does not come on when printer turned on: battery needs
to be recharged. The power adapter cannot supply sufficient for printing so
the battery needs to be partially charged before printing is possible.
Printer not printing and Status light flashing at rate of 0.5 seconds: printer is
out of paper.
Printer not printing and Status light flashing at rate of 0.25 seconds: print head
temperature too hot. Printing will be suspended until print head temperature
returns to normal level.
To Next Page
Loading...
Need help?
General
