Chapter 2 - System Board 2-13
2.9 Wake-on Ring-in Function
The Wake-on Ring-in function enables the system to resume from suspend mode
by monitoring the fax/modem (or any device of similar type) activities. Any
signal or activity detected from the Modem ring-in connector automatically returns
the system to normal operation. Refer to Figure 2-2 for the location of the Modem
ring-in connector (CN17) on the system board.
2.10 Wake-on LAN Function
The system supports the Wake-on LAN feature via the onboard Wake-on LAN
connector (CN16). This special feature allows the system to be activated via a
network. Common network functions, such as remote access, file sharing, etc. are
also supported.
To Next Page
Loading...
