Acer 6000 - Onboard Peripherals

AcerPower 6000 User’s Guide3-14
3.5 Onboard Peripherals
The Onboard Peripherals allows you to configure the onboard devices. Selecting
this option from the main menu displays the following screen:
Onboard Peripherals Page 1/1
Serial Port ........................ [Enabled ]
Base Address..................... [2F8h]
IRQ.............................. [ 3 ]
Parallel Port....................... [Enabled ]
Base Address..................... [378h]
IRQ.............................. [ 7 ]
Operation Mode................... [Standard]
ECP DMA Channel................ [ - ]
• Onboard Device Settings
↑↓ = Move Highlight Bar F1 = Help
Esc = Exit → ← = Change Setting,
3.5.1 Serial Port
This parameter allows you to enable or disable the serial port.
Base Address
This function lets you set a logical base address for the serial port. The options are:
•
3F8h
•
2F8h
•
3E8h
•
2E8h