Acer 6000 - Memory Test; Date and Time

Chapter 3 - BIOS Utility 3-23
3.7.7 Memory Test
When set to
Enabled
, this parameter allows the system to perform a RAM test
during the POST routine. When set to
Disabled
, the system detects only the
memory size and bypasses the test routine. The default setting is
Disabled
.
3.8 Date and Time
The following screen appears if you select the Date and Time option from the main
menu:
Date and Time Page 1/1
Date ..................... [WWW MM DD, YYYY]
Time ..................... [HH:MM:SS]
↑↓ = Move Highlight Bar F1 = Help
Esc = Exit → ← = Change Setting,