AcerPower 6000 User’s Guide3-10
3.4.3 IDE Drives
To configure the IDE drives connected to your system, select the parameter that
represents the channel and port where the desired hard disk to configure is
connected. The options are:
IDE Primary Channel Master
This parameter lets you configure the hard disk drive connected to the master port
of IDE channel 1.
IDE Primary Channel Slave
This parameter lets you configure the hard disk drive connected to the slave port
of IDE channel 1.
IDE Secondary Channel Master
This parameter lets you configure the hard disk drive connected to the master port
of IDE channel 2.
IDE Secondary Channel Slave
This parameter lets you configure the hard disk drive connected to the slave port
of IDE channel 2.
To Next Page
Loading...
