Acer 6000 - Boot Options

Chapter 3 - BIOS Utility 3-21
3.7 Boot Options
This option allows you to specify your preferred settings for bootup.
The following screen appears if you select Boot Options from the main menu:
Boot Options Page 1/1
Boot Sequence
1
st
[CD-ROM]
2
nd
[Floppy Disk]
3
rd
[Hard Disk]
First Hard Disk Drive.................. [IDE]
Primary Display Adapter................ [Onboard]
Fast Boot.............................. [Auto ]
Silent Boot............................ [Enabled ]
Num Lock After Boot.................... [Enabled ]
Memory Test............................ [Disabled]
↑↓ = Move Highlight Bar F1 = Help
Esc = Exit → ← = Change Setting,
3.7.1 Boot Sequence
This parameter allows you to specify the boot search sequence. To change the
order of devices, simply press
or .
3.7.2 First Hard Disk Drive
This parameter specifies whether the BIOS utility will boot from an IDE hard disk
drive or a SCSI hard disk drive. The system will automatically boot from an IDE
hard disk if your system does not have a SCSI hard disk drive. The default setting
is
IDE
.