Acer 6000 - IDE Primary Channel Master; IDE Primary Channel Slave; IDE Secondary Channel Master; IDE Secondary Channel Slave

Chapter 3 - BIOS Utility 3-5
3.2.6 IDE Primary Channel Master
This parameter specifies the current configuration of the IDE device connected to
the master port of the primary IDE channel. For information on how to configure
the IDE devices, see section 3.4.3.
3.2.7 IDE Primary Channel Slave
This parameter specifies the current configuration of the IDE device connected to
the slave port of the primary IDE channel. For information on how to configure
the IDE devices, see section 3.4.3.
3.2.8 IDE Secondary Channel Master
This parameter specifies the current configuration of the IDE device connected to
the master port of the secondary IDE channel. For information on how to configure
the IDE devices, see section 3.4.3.
3.2.9 IDE Secondary Channel Slave
This parameter specifies the current configuration of the IDE device connected to
the slave port of the secondary IDE channel. For information on how to configure
the IDE devices, see section 3.4.3.
3.2.10 Total Memory
This parameter specifies the total amount of onboard memory. The memory size
is automatically detected by BIOS during the POST (Power-On Self Test). If you
install additional memory, the system automatically adjusts this parameter to
display the new memory size.