Acer Aspire 5755 - USB Module Installation

Machine Maintenance Procedures 3-35
Figure 3-37. USB 3.0 Module
3. Remove screw (E) from lower cover (Figure 3-36 and Figure 3-37).
4. Remove module from lower cover.
USB Module Installation 0
1. Install module (A) to guide pins (F) on lower cover (Figure 3-36 and Figure 3-37).
2. Install and secure screw (E) to lower cover.
3. Connect module cable (C) to mainboard connector (D).
4. For USB 3.0, install and secure 2 screws (B) to mainboard (Figure 3-37).
5. Install upper cover.
ID Size Quantity Screw Type
E M2.0x3.0 1
B M2.0x5.0 2
B
D
A
E
F
F
C
SG_JV51_HR.book Page 35 Friday, July 8, 2011 5:58 PM