3-14 Machine Maintenance Procedures
3G Module Installation 0
1. Insert module into mainboard connector (F) (Figure 3-9).
2. Install and secure screw (E) to mainboard.
3. Install main (C) and auxiliary (D) antenna cables on 3G module.
4. Install 3G module door (A) (Figure 3-5).
5. Install and secure screw (B) (Figure 3-8).
6. Install battery pack.
ID Size Quantity Screw Type
B,E M2.0x3.0 2
SG_JV51_HR.book Page 14 Friday, July 8, 2011 5:58 PM
To Next Page
Loading...
